Remote Applicator Head
Purpose
Place the final outlet on a teleoperated boom, crawler, or fixed test stand to increase distance from heat, pressure reaction, or contaminated splash.
Operating concept
A remotely aimed solids-compatible head combines camera/thermal feedback, limited motion, local valve isolation, and automatic return to water-only or stop on communications loss.
Key assemblies
pan/tilt or boom mount; solids-compatible outlet; local shutoff; camera/thermal imager; position encoders; communications link; safe-state controller; purge line
Operating sequence
establish exclusion zone → verify communications and safe state → water-only aim test → enable slurry → apply within limits → stop on fault → purge remotely before approach
Instrumentation
flow and pressure; selected pattern or outlet mode; operator/remote stop
Safeguards
manage reaction force; avoid occupied-area use; provide clearing without hands entering the material path
Failure modes and mitigations
communications loss; unexpected motion; hose torque; camera obscuration; unsafe manual recovery
Variants
fixed stand; crawler head; vehicle boom; gantry head; laboratory robotic positioner
Validation gates
water-only pattern baseline; slurry reach/pattern test; clog-and-clear trial; operator human-factors review
Claim boundary
CLAIM BOUNDARY: No certified design, validated recipe, performance guarantee, regulatory approval, or authorization for uncontrolled-fire use is represented.
Unverified concept for qualified research. Not certified equipment, not a validated formula, not fabrication instructions, and not authorization for active-fire use. Individual conventional components are not claimed as separately invented.
Reproduced from the Comprehensive Apparatus Concept Atlas v1.0 (SSR-TDS-APPARATUS-ATLAS-2026-08-18). Download the full atlas (PDF).