Booster and Relay Slurry Station
Purpose
Restore pressure or divide a long slurry delivery path into inspectable segments without assuming compatibility with conventional relay-pumping practice.
Operating concept
A dedicated slurry-rated booster receives a fully conditioned stream in a contained buffer, measures its condition, and sends it through the next approved segment with bypass and cleanout.
Key assemblies
buffer/degassing vessel; slurry-rated booster pump; segment isolation; pressure/flow sensors; relief return; water bypass; flush tank; communications link
Operating sequence
receive conditioned slurry → verify buffer condition → start booster → control downstream pressure → monitor segment → isolate on fault → flush each segment independently
Instrumentation
intake/discharge pressure; flow; vibration or motor load; bypass state
Safeguards
pressure relief; rated hose/couplings; isolation and depressurization; wear inspection points
Failure modes and mitigations
pressure coordination error; settling during interruption; segment blockage; communications loss; excess hose load
Variants
portable relay skid; trailer relay; stationary hill-climb booster; dual- pump duty/standby; remote crawler relay
Validation gates
closed-loop pressure test; leak/coupling review; abrasion trial; fail- safe bypass and purge
Claim boundary
CLAIM BOUNDARY: No certified design, validated recipe, performance guarantee, regulatory approval, or authorization for uncontrolled-fire use is represented.
Unverified concept for qualified research. Not certified equipment, not a validated formula, not fabrication instructions, and not authorization for active-fire use. Individual conventional components are not claimed as separately invented.
Reproduced from the Comprehensive Apparatus Concept Atlas v1.0 (SSR-TDS-APPARATUS-ATLAS-2026-08-18). Download the full atlas (PDF).