Bag and Supersack Prepared-Material Induction Station
Purpose
Receive documented prepared mineral material in bags, drums, or supersacks without exposing operators to uncontrolled dust or manual lifting hazards.
Operating concept
A guarded bag-break or supersack frame empties into an enclosed hopper; dust extraction and a sealed airlock or screw feeder deliver the material to metering.
Key assemblies
bag-break cabinet; supersack frame and hoist interface; dust collector; sealed hopper; airlock/screw feeder; load cells; lot-code scanner; empty-container control
Operating sequence
verify lot and safety information → dock container → open within enclosure → capture dust → measure inventory → meter to mixer → retain lot/sample record
Instrumentation
water flow; mineral feed rate; ratio proxy; mixed-stream pressure
Safeguards
preserve water-only bypass; prevent dry running; provide sample, drain, and clean-water purge points
Failure modes and mitigations
suspended load; dust exposure; bag collapse; wrong material/lot; bridging
Variants
small-bag cabinet; supersack unloader; drum tipper; vacuum transfer receiver; sealed cartridge system
Validation gates
water-only baseline; ratio repeatability; settling/bridging trial; complete purge demonstration
Claim boundary
CLAIM BOUNDARY: No certified design, validated recipe, performance guarantee, regulatory approval, or authorization for uncontrolled-fire use is represented.
Unverified concept for qualified research. Not certified equipment, not a validated formula, not fabrication instructions, and not authorization for active-fire use. Individual conventional components are not claimed as separately invented.
Reproduced from the Comprehensive Apparatus Concept Atlas v1.0 (SSR-TDS-APPARATUS-ATLAS-2026-08-18). Download the full atlas (PDF).